We Help Business Innovate

The TMD is an advanced high speed, high accuracy 3-axis controlled turning center with heavy duty machining capabilities.Based on our TUD series general-purpose vertical tuning machines, the TMD series is also incorporated with milling and table index functions. In addition to all turning operations, complex machining operations such as milling, boring, drilling and tapping can be all accomplished in only one work piece setup.

     
Machine SpecificationsTMD-13
CapacityTable diameterin (mm)49.2 (1250)
Maximum Swingin (mm)63.0 (1600)
Maximum height from table top to ram bottomwithout APCin (mm)51.2 (1300) 
with APC43.3 (1100)
Maximum cutting heightwithout APCin (mm)43.3 (1100)
with APC35.4 (900)
Maximum cutting diameterin (mm)63.0 (1600)
Maximum cutting force of ramlbf {kgf(N)}5500 {2500(24500)}
Maximum load on tableon the Machinelb (kg)17600 (8000)
on the APC8800 (4000)
TravelHorizontal Travel of rail headin (mm)-24.8 ~ 36.2 (-630 ~ 920)
Vertical travel of ramin (mm)31.5 (800)
Vertical travel of crossrailin (mm)19.7 (500)
TableTable speedmin ¯¹2 ~ 450 
Number of table speed ranges2 Ranges
Maximum table torqueft  ∙  lbf (N  ∙  m)12370 (16775)
SpindleSpindle speedsmin¯¹25 ~ 3000
Maximum spindle torqueft ∙ lbf (N ∙ m)310 (420)
Feed RateRapid traverse rate of rail head                (X-axis)ipm (mm/min)472 (12000)
Rapid traverse rate of ram                       (Z-axis)ipm (mm/min)394 (10000)
Fee rate                                      (X- and Z-axis)ipm (mm/min)0.1 ~ 78.7 (1 ~ 2000)
Rapid traverse rate of table                     (C-axis)deg/min1440
Table feed rate                                      (C-axis)deg/min1 ~ 360
Vertical travel speed of crossrailipm (mm/min)11.8 (300)
RamTypeSquare, fully enclosed type
Guideway4 guideways closed type
Sectionin (mm)8.66 x 8.66 (220 x 220)
ToolType of tool shankISO taper No. 50
Type of pull stud50P
MotorsTable drive motor (30 min/cont.)HP (kW)VAC 60/50 (45/37)
Spindle drive motor (30 min/cont.)HP (kW)VAC 30/20 (22/15)
Feed motors (30 min/cont.)HP (kW)X-, Z-, C-axis: AC9.4 (1.0)
Power sourcesElectrical power supplyAC200/220V  ±  10%, 50/60Hz  ±  1Hz
Power capacitykVA100
Compressed air supplyPressurepsi (Mpa)72.5 ~ 116.0 (0.5 ~ 0.8)
Flowratewithout APCℓ  / min (SCFM)300 (11) air compressor 2.2kW [3.0HP] [with ATC]
with APC720 (25) air compressor 5.5kW [7.4HP] [with ATC, APC]
Machine SizeMachine heightin (mm)210 (5335)
Floor Spacewithout APCin (mm)176 x 226 (4460 x 5740)
with APCin (mm)257 x 260 (6520 x 6620)
Machine weight (not include options)without APClb (kg)44090 (20000)
with APClb (kg)61730 (28000)
AccuracyPositioning accuracy of linear axisin (mm)± 0.0003 / 20 ( ±  0.007 / 500)
Repeatability of linear axisin (mm)± 0.0001 ( ± 0.003)
Positioning accuracy of rotary axis± 10" / 360 °
Repeatability of rotary axis± 5"
Painting colorStandard exterior paint colorMunsell 5Y8.4 / 0.5 & N2.5
Standard interior paint colorMunsell 10YR8 / 4

ATC

  • sec.
  • lbs.
  • 63.0in.
  • in.

Feed

  • 0.1 ~ 78.7IPM
  • 0mm
  • mm.
  • mm.
  • IPM

Model

  • in.
  • in.
  • in.
  • in.
  • in.
  • ±0.0003 / 20 in.
  • ±0.0001in.

Other

  • 176 x 226 x 210in.
  • 257 x 260 x 210in.
  • 44090lbs.
  • 72.5 ~ 116.0PSI
  • 100kVA
  • in.
  • in.
  • kVA

Spindle

  • 25 ~ 3000RPM
  • 310Ft. Lbs.
  • HP
  • HP
  • HP

Table

  • 49.2in.
  • in.
  • 17600lbs.

Travel

  • in.
  • in.
  • in.
  • in.
  • in.